Synergistic Effects of Pseudocolor Imaging,Differentiation, and Square and Logarithmic Conversion on Accuracy of Quantification of Chemical Characteristics Using Test Strips and Similar Products

Test strips and similar products are highly feasible tools for the rapid and approximate determination of chemical characteristics. Although the application of both the quantitative observation of coloration and regression modeling has recently enabled these products to become quantitative tools, their precision and accuracy may be further improved. In this study, the pseudocolor imaging of the coloration image, derivative spectrophotometry-like differentiation of the coloration values, and logarithmic conversion of the raw and derivative values were compared in terms of the precision and accuracy of the quantitative determination of corrosiveness, glucose, nitrate, and pH using the products. The best regression models for the determination were provided by the combination of pseudocolor imaging and differentiation (nitrate and pH); pseudocolor imaging, differentiation, and square-conversion (corrosiveness); or all of the techniques (glucose). When compared to the use of the original 10 raw coloration variables of red-green-blue, cyan-magenta-yellow-key black, and L*a*b* color models only, the above combinations improved the normalized mean absolute error from 14.8% to 3.09% (corrosiveness), 6.33% to 3.15% (glucose), 7.46% to 4.56% (nitrate), and 3.22% to 0.94% (pH). These achievements were largely attributed to the combination of multiple variables that have non-linear and nonmonotonic relationships with the chemical characteristics.     

托卡马克中局域磁扰动引起的高能量离子损失研究

基于单粒子导心运动代码ORBIT，采用测试粒子模拟方法，研究了托卡马克等离子体内部不同径向位置处局域磁场扰动对高能量离子的损失的影响。研究表明，在局域磁扰动主要分布在某磁面附近、其环向具有类似纹波场形式下，可造成一些靠近等离子体中心区域的高能量离子损失，但对靠近等离子边界的离子损失影响相对不大。这些损失的高能量离子均为捕获离子，离子的投掷角越大就越容易损失。此外，造成高能量离子最大损失率的局域场径向位置与这些损失离子的初始径向位置通常存在一定的偏移，而且这个偏移与这些离子的能量密切相关。当局域场出现在某些位置时，能量较低的离子会有一定的损失，能量较高的离子反而不会损失。     

Ab initio and Monte Carlo studies of phase transitions and magnetic properties of YCrO3: Heisenberg model

By using the density functional theory (DFT) and Monte Carlo simulations (MCS) with the Heisenberg model, we have studied magnetic properties of the bulk perovskite YCrO₃. The exchange couplings of the Heisenberg model and the magnetic anisotropy are investigated. The 110 direction in the crystalline structure of the compound has shown the minimum energy, it is the easy magnetic direction. Using Monte Carlo simulations, the magnetizations behavior, the effects of system parameters and the critical exponents of the compound YCrO₃ are implemented. It is shown that the bulk perovskite YCrO₃ belongs to the 3D Heisenberg universality class.     

An improved generalized predictive control algorithm based on the difference equation CARIMA model for the SISO system with known strong interference

ABSTRACT

The single input single output (SISO) system with known strong interference is widely used in various occasions. Due to its strong interference, the control accuracy is hard to guarantee. To solve this problem, an improved generalized predictive control (IGPC) algorithm is developed. The IGPC firstly builds the difference equation CARIMA (Controlled Auto-Regressive Integrated Moving-Average) model of the SISO system and then treats the system as a two input single output (TISO) system and calculates its predictive vector, then transforms it into a SISO system and uses the TISO system predictive vector to calculate the SISO system control increment. A new parameter called phase coefficient is added to inhibit the control lag. Simulations are performed to make the comparison among the traditional GPC, PID control, velocity synchronization control (VSC), fuzzy adaptive PID control (FAPID), model-based robust PID control (BPID) and the IGPC. Results show that IGPC has best performance compared to the others. Finally, experiments are developed which proved that the IGPC algorithm has a higher accuracy in the SISO system with known strong interference than that of VSC.     

Effect of rotation in magneto-thermoelastic transversely isotropic hollow cylinder with three-phase-lag model

This article deals with the various heat source responses in a transversely isotropic hollow cylinder under the purview of three-phase-lag (TPL) generalized thermoelasticity theory. In presence of magnetic field and due to the rotating behavior of the cylinder, the governing equations are redefined for generalized thermoelasticity with thermal time delay. In order to obtain the stress, displacement and temperature field, the field functions are expressed in terms of modified Bessel functions in Laplace transformed domain. When the outer radius of hollow cylinder tends to infinity, the corresponding results are discussed. Finally an appropriate Laplace transform inversion technique is adopted.     

Analyticity of resonances and eigenvalues and spectral properties of the massless Spin–Boson model

We extend the method of Pizzo multiscale analysis for resonances introduced in [5] in order to infer analytic properties of resonances and eigenvalues (and their eigenprojections) as well as estimates for the localization of the spectrum of dilated Hamiltonians and norm-bounds for the corresponding resolvent operators, in neighborhoods of resonances and eigenvalues. We apply our method to the massless Spin–Boson model assuming a slight infrared regularization. We prove that the resonance and the ground-state eigenvalue (and their eigenprojections) are analytic with respect to the dilation parameter and the coupling constant. Moreover, we prove that the spectrum of the dilated Spin–Boson Hamiltonian in the neighborhood of the resonance and the ground-state eigenvalue is localized in two cones in the complex plane with vertices at the location of the resonance and the ground-state eigenvalue, respectively. Additionally, we provide norm-estimates for the resolvent of the dilated Spin–Boson Hamiltonian near the resonance and the ground-state eigenvalue. The topic of analyticity of eigenvalues and resonances has let to several studies and advances in the past. However, to the best of our knowledge, this is the first time that it is addressed from the perspective of Pizzo multiscale analysis. Once the multiscale analysis is set up our method gives easy access to analyticity: Essentially, it amounts to proving it for isolated eigenvalues only and use that uniform limits of analytic functions are analytic. The type of spectral and resolvent estimates that we prove are needed to control the time evolution including the scattering regime. The latter will be demonstrated in a forthcoming publication. The introduced multiscale method to study spectral and resolvent estimates follows its own inductive scheme and is independent (and different) from the method we apply to construct resonances.     

The Cauchy problem for a spin-liquid model in three space dimensions

In this paper, we study the Cauchy problem for magnetic fluid of spin-liquid type with Mermin-Ho relation in the three-dimensional space and prove global existence and uniqueness of solutions. The proof is based on the equivalence relation between smooth solutions of the spin-liquid model and the systems of Schrödinger equations with Abelian gauge field. The Sobolev spaces with fractional derivatives are also used in our estimates.     

Mathematical Modeling of Nylon 6/6,6 Copolymerization in Batch Reactor: Investigating Recipes without Water and with Cyclic Dimer

A model is used to simulate batch copolymerization of caprolactam with hexamethylene diamine (HMD) and adipic acid (ADA) to produce nylon 6/6,6. Four different recipes are considered: a recipe containing caprolactam and an aqueous solution of HMD and ADA, a recipe containing caprolactam and dry HMD/ADA salt, and two recipes with a portion of the caprolactam replaced by nylon 6 cyclic dimer (CD). Consuming CD would be advantageous because CD is an undesirable side product from nylon 6 production. Simulation results lead to three important findings: (i) operation using dry salt rather than aqueous salt solution leads to higher degree of polymerization, (ii) substantial quantities of CD can be consumed to produce nylon 6/6,6 copolymer, and (iii) including water in the recipe is beneficial for achieving improved consumption of CD. The results of this study will be helpful in designing experiments aimed at improving industrial nylon 6/6,6 copolymerization processes.     

Salen–Mg-doped NH2–MIL-101(Cr) for effective CO2 adsorption under ambient conditions

A novel metal-doped metal–organic framework (MOF) was developed by incorporating salen–Mg into NH₂–MIL-101(Cr) structure under ambient conditions. The Schiff base complex was successfully prepared by condensing salicylaldehyde with a free amino group and then coordinating metal ions. Such a structure can endow the sample with higher CO₂ adsorption performance. At 0°C and 1 bar, the salen–Mg-modified sample achieves the maximum adsorption capacity of 2.18 mmol g⁻¹ for CO₂, which was 5.8% higher than the pristine salen–MOF under the same conditions. Notably, the Freundlich model indicates that the CO₂ adsorption process of all samples conforms to reversible adsorption. However, the correlation coefficients (R²) of the Mg-doped sample are lower than that of the pristine sample. Besides, the CO₂/N₂ adsorption selectivity and isosteric heat also show a similar trend. These results indicate that the salen–Mg can enhance the interaction between the material and CO₂ molecules.